10 Misconceptions Your Boss Holds Regarding Double Glazed Window Repair

Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that reduces loss of heat during winter and keeps your home cooler during the summer. Double glazing windows repaired when needed is a great way to ensure that they function properly.

Over time condensation and misting may impact your double-glazed windows. Double glazed windows may become difficult to open and close.

Broken Panes

A rogue ball, a flying stone from your lawnmowers, or a storm that is strong enough can break your double-pane windows, leaving you home vulnerable to the elements. While a damaged window may be difficult to fix, you don't have to have it replaced entirely. The insulated glass between two panes of glass is in good condition, so you can repair your double-paned windows yourself.

First, you'll need to remove any broken glass from the frame. Be careful to keep glass shards from falling to the floor or slipping out of the frame. Use a pair of gloves to protect your hands, and a cloth to cover the area surrounding the broken glass to prevent further damage or breaks. After removing the broken piece take care to clean the entire frame of the window to get rid of any remaining sealant and debris. Sand rough areas of the frame to create a smooth surface on which to put in your new glass.

After the frame has been cleaned then you can apply a fresh layer of glazing to the seam in which the broken pane was removed. This is the best method to ensure your window stays safe and sealed and save you money by stopping drafts and water from entering your home. The next step is to choose the right glazing material. Some options include clear tape, which is a bit more robust than regular tape and will help keep your window safe from further cracking, and glazing film that is similar to clear plastic wrap. This option has the advantage that it can be painted to match the frame of your window and will also block out the elements like ice and rain.

Whatever material you pick regardless of the material you choose, it is essential to press glazier's points into the place where the putty joins the frame. These will hold the newly-formed glass in place and aid it to adhere to the frame. Hardware stores sell glazier's point ropes, which can be rolled out on the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues and if you experience this problem it is recommended to contact the company that provided the window. Many companies offer warranties and guarantees to cover these problems. Condensation or fogging between the panes of your windows is a sign that your seals are broken. Only an expert can fix this issue by replacing the panes.

It's a difficult procedure that requires specialized tools to remove and replace the window. A professional can do this task and provide the equipment. Utilizing these tools could be risky, so it is always best to leave this kind task to a professional.

Wear safety gloves and glasses if you decide to do it yourself. You may be exposed to flying glass fragments. It is important to take out all putty or metal glazing points from the grooves that will receive the new window. Wire-brushing the frame, vacuuming or wiping with a damp cloth is recommended. After the frame is clean and dry, you will need to purchase a replacement glass that is 1/8 inch shorter in each direction than your existing window and test-fit it in the grooves.

You'll have to apply a layer of silicone caulk in the grooves of your frames to ensure that the glass you are installing is securely installed. Once the silicone caulk has dried and cured, you can smooth it out and make any necessary adjustments. The wood molding can be put back in place.

If the weather suddenly changes, double-glazed windows could become difficult to open or close. Extreme temperatures can cause the frames of double-glazed windows to expand or shrink, causing them to sag and stick. Try wiping the frames with water and then lubricating them when this happens however, it's better to seek advice from the company who installed your windows.

Misted

Misted Double Glazing is a problem with windows that develops when moisture gets trapped between the glass panes of double glazed windows. Double glazing consists of two panes of glass that are separated by an insulating space, typically filled with argon gas for better thermal efficiency. This results in an airtight seal that keeps warm air in, and cold air outside.

This seal can become damaged over time and water can accumulate between the glass panes and cause them to become to become cloudy. This occurs because the sun's heat causes the gap between the window panes, which causes the water to evaporate.

This is a normal process, but when it occurs between the window panes it could cause problems as it is no longer able to regulate the temperature of the room and allow the outside temperature to affect the indoor temperature. Northfield Glass can help you when your double-glazed windows begin to mist.

We can replace the blown sealed unit without needing to replace the entire window and is less disruptive than a full replacement. Our misty window repair involves removing the glass unit, washing it, and then replacing it with a new one to create an airtight seal.

Certain companies in the business claim to inject chemicals through holes drilled into windows that have been misty to eliminate the condensation and fog. We don't suggest this method. This method is not only unattractive, but it could also damage the toughened glass and can result in windows that do not completely perform the function it was intended to.

If you don't take care to fix the issue quickly it could result in mold, which could not only damage the window, but also pose health risks to your loved ones. Moisture can also cause issues in your home, such as dampness or rot. In certain cases, the window may need to be completely replaced.

Blown or failed

Double-glazed windows are made up of two glass panes with an inert or air between them. This increases their thermal efficiency, keeping warm air in and cold air out. Over time, the gas can become depressurised and cause a variety of issues.

Condensation in between the panes is among the most common. Although it's a normal phenomenon, it doesn't mean your window is damaged however it could be an indication that you need to re-seal your windows.  double glazing repairs Hayes  may be an indication that your double glazing is damaged in which case it's time to get it replaced completely.

Double-glazed windows can also create draughts. It could be due to an issue with the seal or a damaged handle or lock. A draught can be quite noticeable and will lead to higher heating bills It is therefore essential to get it fixed sooner rather than later. Check the seals around the window frame by feeling the cold air.

You may also see water beads on the outside of windows if the window seals aren't working. This is a sign that you will need to seal your double-glazed windows.

The frames of your windows are designed to move a little bit, as they need to do in order to keep the glass sheets in their place. However, over time, this special packaging material can get compacted, and this could cause the seal to break. This will allow air to flow between the panes, reducing the energy efficiency of your window.

A damaged seal is a clear indication that your double glazing has failed and needs to be fixed immediately. A damaged seal can stop your double glazing from performing its primary job of keeping the cold out and warm inside. A damaged seal could let moisture in your home, which can lead to mold and other unpleasant conditions. Call a double glazing specialist immediately you spot a damaged window seal. They can replace the entire unit.